Posts Tagged ‘x79’
Introduction The X79 based chipset motherboards have been out for quite some time now and with the recent launch of Intel Ivy-Bridge E chips, Intel didn’t do much at this time to improve the chipset. Some will say it’s not needed and some will advise against this and say go for the new release of the Z87 based chipset. While the Z87 base chipset did have great improvements for the newly release Haswell chips, we still see a strong stand from the X79 chipset. Today, we are going to take a look at a board from ASUS that has given the X79 chipset a revision which will push the limits and take full use on Ivy-B E. This is the new ASUS P9X79-E WS motherboard. What does WS stand for? Well this is designed to be a workstation motherboard for those serious video encoders or server and workload crunching. Of course, it makes for a great enthusiast’s motherboard too. While this P9X79-E WS (workstation) motherboard is not as mainstream as some of the newer Z87 chipset based boards, ASUS has put together some unique touches to offer better performance and features. Let’s dive in a talk more about what this X79 chipset based board can do.
Kingston celebrates 10 years of success for their HyperX family by releasing the Anniversary Limited Edition memory lineup. These special edition modules are available in various sizes from 4GB to 32GB, and there are two or four module kist with a wide range of frequencies to chose from: 1600MHz, 1866MHz, 2133MHz and the blazing fast 2400MHz. Today, we’re joining Kingston to celebrate the HyperX’s Anniversary by sampling the 16GB (4x4GB) DDR3, KHX24C11X3K4/16X quad-channel running at the blistering speed of 2400MHz, with lowest latencies of 11, and operating at 1.65v. The HyperX 10th Anniversary Edition lineup is designed to work with multiple platforms from both Intel and AMD (see Specifications for more details).
New products in the desktop sector have taken somewhat of a break for a bit. Intel's latest Ivy Bridge release has settled in and Haswell is slated for mid 2013. As for the immediate future, Intel is on the brink of releasing Ivy Bridge "E" extreme processors in the next quater, and Intel continues socket 2011 with the X79 chipset. In the mean-time, some may have forgotten that Sandy Bridge "E" processors still remain a viable and even better performing platform than Ivy Bridge. Today, we have a dual-motherboard review for you guys today, and both of them are from Gigabyte. Gigabyte is one of the top tier motherboard manufacturers and there was no mistaking that their last release, the Gigabyte Z77 Sniper M.3, was well executed. The Z77 Sniper boasted more features and benefits than any other Gigabyte motherboard, and we were frankly dazzled by the product. Just as the Z77 chipset upgrades to PCIE and USB 3.0, the X79 chipset already has these features with only one issue: Sandy Bridge "E" processors do not support PCIE 3.0. Still, in many respects, the Sandy Bridge "E" is the best alternative in terms of raw performance, at least until Ivy Bridge "E" is released.
The full array of Z77 motherboards has been introduced throughout the industry and Ivy Bridge is now a mainstay for Intel. With all the hype and migration, many have forgotten about another viable, and arguably better, computing platform. Yes, the X79 platform is still alive and so are Sandy Bridge "E" processors. The Sandy Bridge "E" processors have more computing power over "vanilla" Sandy Bridge and Ivy bridge due to the increased L3 cache. With that said, Ivy Bridge "E" processors are due to arrive 4th quarter 2012. The Ivy Bridge "E" series will carry the same architecture with a die shrink and more transistor density than it's little brother version of Ivy Bridge did. The transistors are Intel's new 3D Tri-Gate Transistors which operate more efficiently and Ivy Bridge "E" still uses socket 2011.