Pureoverclock: PC Hardware reviews and news for overclockers!

 
 
 
 
 

Posts Tagged ‘240mm’

XIGMATEK puts a Pump in the Middle of a Radiator!?!

Ah, Twitter! Sometimes news is hiding in the depths of media that is hard to find, but my feed gives me a glimpse that leads to an interesting discovery. In this case, XIGMATEK showed off some prototypes for some CLCs at Computex that went mostly under the radar. Sadly, I feel like these units should’ve made more of a splash than they did, but I suppose we can start trying to rectify this problem. Let’s see what a radiator looks like with a pump in the middle of it! There’s is very little about these units so far. I basically saw a tweet from XIGMATEK, that led me to a Tek Syndicate Facebook post, that further led me to an article Google translate┬áput into English for me. Some people are likely to blame patents for this design and it could be the case in this instance. However, XIGMATEK could seriously be onto something with their design. First, fans inherently move air away from their centers due to the laws of physics. This leaves a bit of a dead zone as far as airflow is concerned. Having the pump located at the center point of the rad is a great way to utilize space that isn’t as efficient to begin with. While the amount of heat generated from pumps is unlikely to be a concern, personal experience has taught me that when the pump isn’t on the block, the block is much easier to install. Outside of the possible performance ramifications, the design can work well for appearance also. The lack of a pump on the block allows for some easier aes...



Enermax Liqtech 240 & Liqmax 120 CPU Cooler Review

All in one liquid cooling units are among the popular cooling solutions recently. With AIO units gaining popularity due to their cost to performance ratio, it doesn't come as a surprise. If we look back a mere 2 years ago, liquid AIO cooling units were few and far between, and only a hand of manufacturers offered this type cooling solution. However, today we find AIO units flooding the market, and selecting the right one can be a hard choice with so many readily available. Today are going to be looking at 2 units from Enermax that recently joined in on this market. We have the Enermax Liqtech 240 and Liqmax 120S AIO cooling units on the test bench. While choosing AIO units should be based on cooling performance, sometimes we find that aesthetics and software can be a deciding factor as well. Let's put both these units on our bench for testing today, but before we do that, let's talk about Enermax for just a moment.



 
 
 
 
 

Thermaltake Water 3.0 Performer and Extreme

Introduction Thermaltake is no stranger to the water cooling market having had the ProWater and the BigWater systems out for quite a long time now. They also got into the AiO cooler market with the Asetek-made Water units.Well Thermaltake has released their latest AiO coolers in the Water series – the Water 3.0 Performer , Water 3.0 Pro and Water 3.0 Extreme. The units are made by Asetek as are most of the market’s AiO units, but Thermaltake put their own touch on these for good measure. They were kind enough to send us both a Performer and an Extreme to check out so let’s get to it!   About Thermaltake: “The beginning of every myth and legend is about dreams and desire: the challenging, creative and combative features of Thermaltake Group create an exciting and fascinating user experience to share with everyone, while allowing users to enter a selfless state in terms of function and potential. Thermaltake Group’s 3 main brands: Thermaltake, Tt eSPORTS and LUXA2 have been merchandising throughout the world, and have successfully established 6 business footholds in areas such as Europe, America, Oceania, Japan and China, with 95 regional distributors and over 4000 premium retailers. All product planning is orientated by observation of global PC peripheral market and understanding of consumer demands. Thermaltake creates direct contact opportunities with resellers and consumers by participating major global ICT exhibitions and trade shows e...



 
 
 
 
 

Cooler Master Seidon 240M

AiO (all in one) CPU coolers have been around for quite some time now. These days just about every company is coming out with their own version and most of them typically look the same with only one or two distinguishing features. Then there's the Cooler Master Seidon 240M. The Seidon on the surface seems like your typical 240mm AiO CPU cooler, but Cooler Master has added their own unique style to this unit. They were kind enough to send one out for me to put it through the wringer so I did just that! Let's get to it shall we?





Find us on Google+