Features and Specifications:
Staying true to the Phanteks’ Enthoo line, the Luxe features a sandblasted front and top panel. Ambient lighting runs from top to front of the case on both sides. Even though smaller in size, the Enthoo Luxe boosts many features from the award-winning Enthoo Primo. The Luxe comes in two colors, a black as a white version. It is also pre-installed with a 200mm front fan and 2x PH-F140SP fans. Phanteks’ Enthoo Luxe has extensive watercooling capabilities that allows for four different radiator mounting locations as well as sizes.
- Clean and elegant design from the Enthoo series
- Sandblasted aluminum faceplates with matte finish / Glossy white aluminum faceplates.
- Multi-color ambient lighting
- Stealthy interior design
- Dual removable hard drive cages
- 2x Removable Drop-N-Lock SSD brackets
- Fully equipped with dust filters (1x top, 1x front, 2x bottom)
- Removable top mesh panel for easy fan installation and dust filter cleaning
- Compartment for fan installation in top panel
- Clean cable management -Using Phanteks’ pre-installed Hoop-N-Loop cable ties + Removable PSU cover
- MOD friendly structure – fastened by screws instead of rivets (removable top/odd/hdd panel)
- Ambient lighting with LED on/off switch and color control (10 colors)
- LED connector reserved for Phanteks’ multi-color interior light strips (PH-LEDKT_M1/M2). This light strip can be controlled simultaneously with the exterior lighting system of the Enthoo Luxe.
- PH-LEDKT_M1/M2kits are not included.
Air cooling support:
- High cooling capacity (capable of housing 8x 120mm fans / 7x 140mm fans / 2x 200mm fans)
- Comes with 3 Phanteks premium fans 1x PH-F200SP in front 1x PH-F140SP in top 1x PH-F140SP in rear
- Comes with a PWM fan hub (2x PH-CB-Y3P included) Capable of powering up to 11 fans (extra PH-CB-Y3P required)
- Thermally isolated PSU
Water Cooling support:
- 4 different installation areas for single to triple radiators (120mm and 140mm form factor). 2 reservoir mounting location (included Reservoir bracket / chassis rear)
- Pump bracket