Danger Den Black Series Tower 21
Features and Specifications
Below are the features and specifications for the Black Series Tower 21:
- Size: 7.75" Wide x 16.75" Deep x 23" Tall
- Motherboard – Standard ATX
- Supports ATX PSU
- Two radiators up to 3x120mm size and 2x80mm size!!
- Radiator mounts with 15mm spacing (Black Ice and Feser radiators)
- 4 x 3.5” Internal Drives
- 1 x 5.25” External Drive Bay
- Mounts for 3 x 120mm Fans and 3 x 80mm Fans
- Compatible With Most Aftermarket Air Coolers – approx. 7" (17.7cm) clearance
- Strong and Durable Acrylic construction
- Black Acrylic Frame, Top, Base and Motherboard panels perfect for showing off the case, your hardware, and hiding all the wires
- All external edges are rounded
- All external mounting screws are flush mount countersunk
- Colors – Frame & Motherboard Tray, Top and Bottom are Black except for the "Phantom" case:
- "Phantom" Case is all Clear Acrylic
- "BiPolar" Case is a Clear Front and Back
- "Nightmare" Black Front and Back
- "Blood Shot" Deep Red Front and Back
- "Orange Box" UV Orange Front and Back
- "Bruiser" UV Blue Front and Back
- "Gangrene" UV Green Front and Back
- "Yellow Fever" UV Yellow Front and Back
- Fan Grill comes standard with the DD logo. Options to remove the DD logo on the 3x120mm on the front and 3x80mm on the back. These will be open holes.
- Danger Den is etched in the bottom of each side of the case standard. This can be removed also.
Let’s take a look next at the huge package of components and accessories for the Tower 21.