Pure Overclock – Computer Hardware News, Reviews and More


Cooler Master Silent Pro Hybrid 1050W

Posted October 4, 2011 by Jake in Cases & PSU







Total Score



Discuss in the Forum
by Jake
Full Article
« »

Features and Specifications

Below are the features of the Silent Pro M 1050W:

"The Silent Pro Hybrid 1050W is part of Cooler Master’s first fully modular power supply series. It utilizes a single powerful +12V rail that operates at over 90% efficiency and carries an 80Plus Gold certification. It is targeted at the high-end enthusiast builder market. A fan speed controller is included in the package. It occupies a 5.25” drive bay, is powered by directly by a first ever 7V fan power port on the power supply, and enables a user to control the Silent Pro Hybrid 135mm Silent Hydraulic Bearing fan along with up to 3 system fans."

  • Fully modular cables
  • Longer cables for easy cable management
  • Noise-free operation
  • World’s first PSU integrated 7V fan port
  • Safety fan operates under high system loads
  • 5.25” Fan controller for both the PSU and system fans
  • Adjustable 135mm Super Silent Hydraulic Bearings Fan
  • Patented Technologies:
    • Heat Transfer Technology: A unique “L-shaped” heat-sink to remove heat from the PSU
    • Hybrid Transformer: Unique design that combines heat-sink with transformer
    • Hyper Path: Places IC close to transformers leading to huge efficiency ratings
  • 90%+ efficiency with 80Plus Gold Certification
  • 5 Year Warranty

Here are the specifications of the Silent Pro 1050W:

  • Model: RS-A50-SPHA-D3
  • Type: Intel ATX12V V2.3 / SSI EPS 12V V2.92
  • Dimentions: 150x180x86mm (5.9×7.3.4 inch)
  • Input Current: 11-5.5A
  • Input Frequency Range: 47Hz-63Hz
  • PFC: Active PFC (>0.9)
  • Power Good Signal: 100-500ms
  • Hold Up Time: 17ms
  • Efficiency: 90% Typically
  • MTBF: 100,000 Hours
  • Protection: OVP, UVP, OCP, OPP, OTP, SCP
  • Output Capacity: 1050W (984W / 82A on single +12V rail)
  • Maximum Output Capacity: 1260W
  • Fan: 135mm (Silent Hydraulic Bearing)
  • Certifications: 80 PLUS GOLD
  • Connectors and Lengths:
    • 1 x 20+4 Pin motherboard (650mm)
    • 2 x 4+4 Pin CPU 12V (700mm)
    • 6 x 6+2 Pin PCI-e (650mm + 100mm)
    • 12 x SATA (500mm + 100mm each)
    • 5 x 4-Pin Peripheral (500mm + 100mm each)
    • 1 x 4-Pin Peripheral + Floppy (500mm + 100mm each)
    • 3 x 3-Pin Fan Cable

The most notable feature here is the fanless mode, and thus the Hybrid name of the unit. Essentially what happens is when the unit is operating at less than 200W load, the fan shuts off and runs silent. However, when a heavier load is applied above 200W or 50°C, the fan kicks in and runs just like a regular power supply.

Let’s take a closer look at the Silent Pro Hybrid 1050W.

« »


Be the first to comment!

Leave a Response


Find us on Google+