New DFI motherboards coming
DFI’s nforce4 boards were absolute favourite’s amongst overclockers and with very good reason, so when they start to ready new boards based on new chipsets you should take note. There are quite a few new boards on there way for both Intel and AMD based on both NVIDIA’s nForce 5 series and the ATI RD580 and RD550 chipsets.
On the NVIDIA and AMD socket AM2 side of things the current LANParty UT nF4 SLI-DR Expert will be replaced by the LANParty UT nF590 SLI-M2R/G. The LANParty UT nF590 SLI-M2R/G will be the only nForce 590 SLI based board DFI is offering this generation. The board will feature two PCI Express x16, one PCI Express x8, one PCI Express x4, and three PCI slots. There will also be a total of eight SATA II ports with six powered by the NVIDIA MCP and two ports powered by a Silicon Image SIL3132 controller. DFI will support Dual Gigabit LAN which means there will most likely be Teaming support.
An nForce 570 SLI based LANParty UT nF570 SLI-M2/G will replace the previous LANParty UT nF4 SLI-D/DR. Features will be similar to the nForce 590 SLI based board except there will be two PCI Express x1 slots instead of the PCI Express x8 and x4 slots on the LANParty UT nF590 SLI-M2R/G. The Silicon Image SIL3132 SATAII controller is also removed.
Replacing the entry-level LANParty UT nF4-D/nF4 Ultra-D models will be the LANParty UT nF570-M2/G. The board will be similar to the nForce 570 SLI variant but lack support for SLI.
You can fine more?details on DFI’s new ATI/AM2 chipsets?along with?lots of Intel offerings via the link above..